Winco Standby Emergency Power Generator

Free Shipping!

Model	PSS27LS-3
Electrical Specifications
Maximum Power Rating (watts)	27000 watts
Continuous Power Rating (watts)	27000 watts
A.C. Output Voltage @ 60 Hz.	120 / 240 volts
Power Factor (pf)	1.0 pf
"Phase, Frequency"	Single / 60 hz
Motor Starting Ability (hp)	12 hp
Generator Type (R.F.B. / R.F.L. / R.A.B.)	R.F.L.
Hour Meter	Standard
Voltage Regulation	+/- 1%
Frequency Regulation (Nl To Fl)	+/- .5%
Mechanical Specifications
Generator Speed (rpm)	1800 rpm
Brushless	Yes
Engine Specifications
Make / Model	GM / 3.0
Displacement / Type	181 cu in / 4
Rated Power @3600 rpm	48 hp
Engine Speed	1800 rpm
Low Oil Protection	Standard
Starting System	Electric
Electronic Ignition	Standard
Remote Start	Standard
Cooling System	Liquid
Recommended Battery Size (Group/CCA)	24 / 650 cca
DB Rating @ 7 meters (23 ft.)	74.00 dBA
L.P. Information
Watts	27000 watts
Amps	112 amps
Rate Of Consumption (Full Load)	3.3 gal / hr
Rate Of Consumption (Half Load)	2.4 gal / hr
Natural Gas Information
Watts	24000 watts
Amps	100 amps
Rate Of Consumption (Full Load)	325 cu ft / hr
Rate Of Consumption (Half Load)	205 cu ft / hr
Circuit Breakers
Main Breaker	Optional
Size & Weight
L x W x H( in.)†	88 x 35.3 x 48.5 in.
Ship Weight (lbs.)	1510 lbs.
Warranty Information
Generator	2 yrs or 1000 hrs
Engine	1yr or 2000 hrs

About Winco Inc.:

Winco has been providing dependable power solutions since 1927. Their packaged generators use only quality Honda, Briggs &Stratton, GM, Ford, or other high-grade brand engines.

Special Notes (PLEASE READ):

• Free shipping within 48 continental U.S. states
• Due to size and weight, this unit can only be delivered to freight terminals, or businesses with docks or extended-arm forklifts .
• Customer is responsible for arranging delivery from terminal to residence.
• Installation of this unit should only be performed by a licensed professional.
• Consult with your contractor and electrician prior to making a final decision.
• Customer is responsible for verifying local and regional regulations (for example, city permits), before unit is ordered.
• This unit is capable of both LP and natural gas. However, this must be configured at factory BEFORE it is shipped. Changing the fuel source after shipping will result in extra service fees from manufacturer. There is no extra cost for either choice, when you choose in advance.